|
Post by bluzcat on Mar 6, 2020 19:30:21 GMT -5
In my not-so-smart days I used a short Allen wrench to adjust the truss rod on a Strat and created a nice ring that is brighter than the surrounding wood from the wrench rubbing the truss plug. What would be the best solution to blend that back in? I know rosewood is typically unfinished...thanks!
|
|
|
Post by Peegoo 🏁 on Mar 6, 2020 21:33:40 GMT -5
The exposed surface of the walnut or rosewood plug is finished when the headstock is sprayed.
Any clearcoat will work. You can use a small artist's brush to apply a small amount right on the damaged finish area. The clear will soak in and darken the wood and help blend it all back in.
|
|
|
Post by bluzcat on Mar 6, 2020 22:56:45 GMT -5
Thanks! I wasn’t sure if it was finished or not so I will get to it.
|
|
|
Post by Peegoo 🏁 on Mar 6, 2020 23:50:48 GMT -5
Borrow your wife's clear nail polish when she's not lookin'.
|
|
|
Post by bluzcat on Mar 7, 2020 1:16:11 GMT -5
Oh, you mean for the guitar right?
|
|
|
Post by Peegoo 🏁 on Mar 7, 2020 1:47:50 GMT -5
[cups hands over ears]
Blah-blah-blah-I'm-not-listening-to-anything-you're-saying-I-can't-hear-you-anyway
|
|
|
Post by LTB on Mar 11, 2020 20:08:20 GMT -5
Borrow your wife's clear nail polish when she's not lookin'. That is acrylic laquer right?
|
|
|
Post by Peegoo 🏁 on Mar 11, 2020 20:17:42 GMT -5
Yes.
One of the best-kept secrets for touching up any guitar's finish is nail polish. Take your guitar with you and compare it with the nail polish in the store, and you can usually get a really close color match. And it's only a few dollars.
|
|
|
Post by LTB on Mar 11, 2020 22:25:09 GMT -5
Yes. One of the best-kept secrets for touching up any guitar's finish is nail polish. Take your guitar with you and compare it with the nail polish in the store, and you can usually get a really close color match. And it's only a few dollars. Thanks for the good advise!
|
|