DrKev
Wholenote
It's just a guitar, it's not rocket science.
Posts: 416
|
Post by DrKev on Sept 26, 2020 9:36:18 GMT -5
Like it says on the wrapper, I just got my first fret erasers. Nothing special, a pair of Hosco branded 1000 grit from Thomann. It gave a similar fret shine to a 3200 grit micro mesh pad.
I tried them put on a neglected guitar donated to the rock school I work for. I like that it'll obviously last longer that micromesh and seem to be faster on a fret by fret basis. But overall it seemed less efficient because with the 3" x 4" micormesh pads I can do multiple frets at once and with enough pressure the pads conform to the curved surface of the fret. With the eraser I have to work the fret surface more carefully. And 3200 micromesh finish not a polished fret in my books and I'll still work through 4000, 6000, 8000, 12000 grits.
What d'yall think? Should I give it more time before deciding on getting finer grit erasers or stick with micromesh?
|
|
|
Post by funkykikuchiyo on Sept 26, 2020 11:51:13 GMT -5
I'm not sure how it compares cost wise, but pick up some finger nail buffers. Get the cheapest ones since you're not doing fingernails it is likely not to make a difference. They're essentially a micromesh and work really well. They work nicely on nuts and saddles, too... obviously keep a separate one for that so you don't turn them black. If I'm using those on frets (I don't always), I'll go up through the grits with regular sand paper and finish with the fingernail buffer. They're soft and conform a bit. I generally will ride up each side and that is more than enough.
They've been getting more and more expensive. I used to be able to buy a whole pile of them at a beauty supply place for $20, but they're enough that I have to conserve them a bit. I really only use them when I'm doing refrets (I like dressing 'em up when someone drops ~$400) so they last plenty long for me.
|
|
Tequila Rob
Wholenote
Posts: 683
Formerly Known As: Guitar Fool
|
Post by Tequila Rob on Oct 22, 2020 9:19:52 GMT -5
I put the Stew Mac set a few years ago...came in a pack of six, grits from 180-1000...I thought they worked pretty well...biggest complaint is after awhile you'll get a groove in them that turns black that has to be cleaned off occasionally..
then when I was at Hobby Lobby, I found the a set of sanding pads that goes from 3200-12000....these are excellent
I think they both have their usefullness
|
|