|
Post by roly on Apr 21, 2021 22:26:04 GMT -5
it's most likely the manifold couplers or the rotor oscillators....yes?
|
|
|
Post by Riff Twang on Apr 22, 2021 0:42:50 GMT -5
Is the turbo encoupler not functioning nominally?
|
|
|
Post by roly on Apr 22, 2021 0:51:52 GMT -5
All tests indicate that the TE is not the issue, I'm beginning to suspect the bilateral wiper valves.
|
|
|
Post by Auf Kiltre on Apr 22, 2021 7:34:28 GMT -5
A quick few taps on the BWVs using a Schming Heemerhammer should produce a harmonic overtone somewhere between G# and Ab. If it doesn't you may need to get down to Western Tire and pick up a handful of #2 Robertson's and Mercury tape.
|
|
|
Post by NoSoapRadio on Apr 22, 2021 12:31:19 GMT -5
Unless you have a Langstrom 7" gangly wrench, you can't properly diagnose a problem with a Rebostrand.
|
|
tmc
Wholenote
Posts: 903
Formerly Known As: tmc
|
Post by tmc on Apr 22, 2021 14:52:40 GMT -5
Remember to calibrate the Rebostrand tangential to the engaged conveyor belt.
|
|
|
Post by Think Floyd on Apr 22, 2021 15:21:59 GMT -5
I don't think it rose to the level of a Recall, but I do believe that the manufacturer put out a Service Bulletin on that.
|
|
|
Post by Ricketi on Apr 22, 2021 16:10:51 GMT -5
Once you're in there you might want to adjust the flip torque on the bye pass valve to get the proper gyration.
|
|
|
Post by bluzcat on Apr 22, 2021 17:00:54 GMT -5
And let’s not forget a can of Beep! for the horn while you’re in there...
|
|
|
Post by Seldom Seen on Apr 22, 2021 17:18:37 GMT -5
Yes but the megabaloney compensator has be properly engaged prior to oscillatory calibration. Otherwise the Rebostrand won’t quackle.
|
|
|
Post by roly on Apr 22, 2021 20:35:47 GMT -5
I had no Idea that my problem is so complicated.
So....Do need I consider the angle of refraction relative to the diametrically opposed converse of the traction coefficient?
|
|
|
Post by Leftee on Apr 22, 2021 21:05:55 GMT -5
It’s either that or more medication.
|
|
|
Post by roly on Apr 22, 2021 21:08:52 GMT -5
"If it doesn't you may need to get down to Western Tire and pick up a handful of #2 Robertson's and Mercury tape."
Mr. Kiltre I get the Robertson # 2 bit part, but, the merc tape remark seems pointless......doesn't every responsible Canadian have a supply of merc tape?
I think you are jealous about the availability of # 2 Robbie bits up here....:>)...I can help you with that.
What I don't get is "why don't Americans keep a supply of lawn tape on hand?".... sorry, I can't disclose my sources.
cheers
|
|
|
Post by LTB on Apr 23, 2021 5:01:41 GMT -5
It’s either that or more medication. I think more medication is the order of the day!
|
|
Ragpicker
Wholenote
I'm playing it in a different key
Posts: 336
|
Post by Ragpicker on Apr 23, 2021 22:17:13 GMT -5
Its important to check the canootin valve too.
|
|
Grizbear-NJ
Wholenote
"I'll do the BEATING around here"
Posts: 217
Age: 71
|
Post by Grizbear-NJ on Apr 23, 2021 22:25:14 GMT -5
You guys do realize; that as a drummer, I am completely lost in this conversation!!!
|
|