Spinoff of Roland Micro Cube discussion in Amps section: extension speaker jack how-to
Feb 7, 2020 22:57:28 GMT -5
Post by Peegoo 🏁 on Feb 7, 2020 22:57:28 GMT -5
A few folks asked me how to install an extension speaker jack in a Roland Micro Cube. A picture is way better than words, so here ya go. This mod disconnects the internal speaker when a plug in inserted into the extension speaker jack. I've plugged this into my 4-Ohm 4x12 cabinet and it rattles the windows (I am hot kidding). And it sounds bloody fantastic too.
The Microcube needs a 4-Ohm speaker load, so unless you're plugging into a 4-Ohm load, do not play the amp turned up all the way or you might cook the power stage in the amp. Remember that doing this sort of mod will void any warranty you have on the amp.
Let me know if you have any questions on this.
The Microcube needs a 4-Ohm speaker load, so unless you're plugging into a 4-Ohm load, do not play the amp turned up all the way or you might cook the power stage in the amp. Remember that doing this sort of mod will void any warranty you have on the amp.
Let me know if you have any questions on this.
