|
|
Post by slacker 🐨 on Jan 7, 2022 13:28:14 GMT -5
I think I posted my TV built in that I made awhile back using a skill saw/guide and chop saw. I was very happy with how it turned out.
My daughter (no pics) just graduated with an engineering degree and is starting a new job in the KC area. Her new apartment is nice, but it really needs an island in the kitchen.
Due to some miscalculations on my part, I have some extra drawers and soft close slides so I thought I'd use those as a starting point to building a custom semi-portable island. It'll have a column of drawers, a glass door with shelves and a butcher block top big enough to add two breakfast bar type seating spots.
I've got plans drawn up along with a materials list and cut diagrams for the plywood. If I get a chance, I'll post those here.
Any advice?
|
|
|
|
Post by NoSoapRadio on Jan 7, 2022 14:11:35 GMT -5
I don't think I would have a glass door on a lower cabinet -- but I have five young granddaughters so maybe it's just me.
But I remember your photos of the built in you posted previously -- I think you've got this under control.
|
|
|
|
Post by slacker 🐨 on Jan 7, 2022 14:19:19 GMT -5
I don't think I would have a glass door on a lower cabinet -- but I have five young granddaughters so maybe it's just me. But I remember your photos of the built in you posted previously -- I think you've got this under control. Hmmmm....that's a really good point. The glass door was her idea, but I'm gonna revisit that with her. Thanks! |
|
|
|
Post by Mfitz804 on Jan 7, 2022 15:29:28 GMT -5
I don't think I would have a glass door on a lower cabinet -- but I have five young granddaughters so maybe it's just me. But I remember your photos of the built in you posted previously -- I think you've got this under control. Hmmmm....that's a really good point. The glass door was her idea, but I'm gonna revisit that with her. Thanks! Yes, even if there were no pets/kids, I would be equally likely to bang my ginormous feet against it, so I would try to avoid that. My dad made one that my parents had in their kitchen for about 30 years. The top was made from a section of bowling alley surface when a local church removed it from their basement and put it out for collection. He found one appropriately sized, cut it to make it even, and built around it. |
|
|
|
Post by LTB on Jan 7, 2022 15:45:46 GMT -5
I don't think I would have a glass door on a lower cabinet -- but I have five young granddaughters so maybe it's just me. But I remember your photos of the built in you posted previously -- I think you've got this under control. Hmmmm....that's a really good point. The glass door was her idea, but I'm gonna revisit that with her. Thanks! Just tell her don't have any kids and go for it  |
|
|
|
Post by rickyguitar on Jan 7, 2022 16:40:37 GMT -5
A dad's work is never done. Enjoy.
|
|
leftrightout
Wholenote
Sometimes I pretend to be normal and then it becomes boring..............
Posts: 206
|
Post by leftrightout on Jan 7, 2022 17:04:16 GMT -5
a safety glass would work or laminated security glass just don't know if it would be cost effective though
|
|
argo
Wholenote
Posts: 403
|
Post by argo on Jan 7, 2022 22:30:58 GMT -5
Semi portable? If you are using casters be aware of balance, The casters will really shrink the center of gravity. Even without casters a Butcher block overhang for sitting may tip very easy.
|
|
|
|
Post by Opie on Jan 8, 2022 6:57:25 GMT -5
Semi portable? If you are using casters be aware of balance, The casters will really shrink the center of gravity. Even without casters a Butcher block overhang for sitting may tip very easy. As a cabinetmaker with 4 plus decades experience, this is the most critical response. Typically with the overhang of a heavy top, combined with a recessed toe kick, it's a disaster waiting to happen. I've seen companies do it, but I always passed. |
|
matryx81
Wholenote
I think I know the reason but I can't spell it.
Posts: 773
|
Post by matryx81 on Jan 8, 2022 11:15:28 GMT -5
I would be equally likely to bang my ginormous feet against it So that REALLY is a thing, then? (Size 14 here, and I feel like I am constantly kicking stuff I did not mean to.) |
|
|
|
Post by Mfitz804 on Jan 8, 2022 11:21:01 GMT -5
I would be equally likely to bang my ginormous feet against it So that REALLY is a thing, then? (Size 14 here, and I feel like I am constantly kicking stuff I did not mean to.) I am size 14 and absolutely, sometimes it’s like I’m not used to the size of my own feet and they precede my arrival. And don’t get me started about the gas/brake pedals in the car, they couldn’t have spared an extra inch or two between them?? |
|
matryx81
Wholenote
I think I know the reason but I can't spell it.
Posts: 773
|
Post by matryx81 on Jan 8, 2022 11:50:33 GMT -5
No, they could not.
They did it to spite those with larger feet.
|
|
|
|
Post by modbus on Jan 8, 2022 12:26:52 GMT -5
I don't think I would have a glass door on a lower cabinet -- but I have five young granddaughters so maybe it's just me. But I remember your photos of the built in you posted previously -- I think you've got this under control. Hmmmm....that's a really good point. The glass door was her idea, but I'm gonna revisit that with her. Thanks!
Plexiglass maybe?
|
|
|
|
Post by Peegoo 🏁 on Jan 8, 2022 16:39:44 GMT -5
Sounds like you have things well in hand. I addition to the good advice above, A few other considerations:
If the island's top is small, e.g., 24" x 36", having the drawers slide out from the long dimension can make it tippy. Consider having a short drawer from each end of the short dimension; it will be way more stable.
Measure the existing countertops in the kitchen and make the island's finished height the same.
|
|
|
|
Post by reverendrob on Jan 10, 2022 4:09:34 GMT -5
I would be equally likely to bang my ginormous feet against it So that REALLY is a thing, then? (Size 14 here, and I feel like I am constantly kicking stuff I did not mean to.) Before the bad leg got blown up, I was a 14 triple wide. Now, the bad foot is measured in acreage. |
|
|
|
Post by slacker 🐨 on Jan 10, 2022 10:12:12 GMT -5
Semi portable? If you are using casters be aware of balance, The casters will really shrink the center of gravity. Even without casters a Butcher block overhang for sitting may tip very easy. Semi-portable in that it will not be fastened down. No casters, but I am putting in recessed adjustable leveling feet with the idea that you can adjust them to be even with the plywood sides and tweak one or two just enough to keep it from rocking if the surface isn't flat. That way it won't reduce the footprint. I also have decorative feet on the overhang side to help stabilize if someone leans on it. Question: should I finish the interior of this thing (paint or varnish). I wasn't planning to, but now wondering if I should. |
|
|
|
Post by NoSoapRadio on Jan 10, 2022 13:24:08 GMT -5
Question: should I finish the interior of this thing (paint or varnish). I wasn't planning to, but now wondering if I should. I always do. I would usually use a water based sealer. It's just more professional looking and easier to clean than bare wood. In many cases you can apply the finish before you assemble the carcase. |
|
|
|
Post by Peegoo 🏁 on Jan 10, 2022 13:32:43 GMT -5
Yes, apply at least one coat of water-based poly to all shelves and drawers. Prevents stains on the wood if a wet pan or utensil is placed there after washing.
|
|
|
|
Post by slacker 🐨 on Jan 10, 2022 14:05:13 GMT -5
I was going to apply poly to the drawers and shelves...was thinking about the "interior walls" of the cabinet. I guess if I'm going to do pretty much everything else, no reason not to.
|
|
