|
Post by walshb 🦒 on Jun 29, 2022 12:23:23 GMT -5
A few months ago, I noticed a buzzing sound in our hallway. It turned out to be coming from inside the doorbell chime. I couldn't get it to stop completely, but stuffing some paper tissue into the unit helped to reduce the noise. But every time I went into that hallway, the buzzing still bothered me.
I tried doing a search and it must be a common problem because I found a lot of discussions, but most results recommended buying a new chime. I decided to take it apart and see if I could get lucky. There were four metal tabs holding the plate for the terminals that the wires attach to. The tabs go through a slot and then are bent over, to avoid using screws. There were two larger tabs on the back of the unit also, same design.
I bent all 6 tabs over further and attached the two wires. I thought I must have shorted something out, because it was completely silent again. I had to go try the doorbell to see if it still worked.
So if you ever have a similar problem, try this simple fix before buying a new chime. Probably about 15 minutes total.
|
|
|
Post by RufusTeleStrat on Jun 29, 2022 13:26:57 GMT -5
Please present your man card for validation. This is good work. You can probably put an add in teh paper and offer Doorbell repair for $29 and make some good money.
|
|
|
Post by zenland on Jun 29, 2022 19:59:14 GMT -5
Gonna need more than the 29$ these days!
|
|
|
Post by walshb 🦒 on Jun 29, 2022 20:09:19 GMT -5
Gonna need more than the 29$ these days! But, if I can do 4/hr, that's over $100 per hour.... as long as they are all right next door to each other!
|
|
|
Post by RufusTeleStrat on Jun 29, 2022 20:40:42 GMT -5
Well my thought is if it is irreparable then you charge 49.99 plus the new ringer, or 79.99 for ring doorbell installation.
|
|
|
Post by rickyguitar on Jun 30, 2022 21:52:41 GMT -5
Didn't Elvis just use a .45?
|
|